Language

English

日本語

Product Features

■ It adopts photoelectric sensors imported from the United States and has independent intellectual property rights.

■ Differential photoelectric sensor accurately detects the position of the motor rotor, with good linearity, small drift, high resolution and repeat positioning accuracy.

■ Accurate load design for 10mm lens, high precision motor assembly, reasonable structure, small static friction coefficient and small zero offset, to ensure the best dynamic characteristics of the system.

■ The driver has a position and speed advanced detection function, which greatly improves the dynamic response performance and scanning speed of the entire system.

■ It is designed with overload, over current and reverse connection protection to make the system operation more reliable.

■ The whole system adopts electromagnetic compatibility optimization design, with high signal-to-noise ratio and strong anti-interference ability.

■ Water cooling structure is adopted to effectively control the working temperature of the galvanometer.

HP10-2000 Operation Guide

1. Before starting up, make sure that the water circuit is connected correctly and the water circulation is normal before starting up, otherwise it may damage the galvanometer.

2. Before starting up, please carefully check whether the wiring sequence of the external connection wires of the galvanometer is correct, otherwise it will affect the normal operation or damage of the galvanometer.

3. The two motors and the two sockets on the drive board must be connected according to the matching serial number and cannot be interchanged, otherwise self-excited phenomenon will occur.

4. Ensure the accuracy of the laser optical path output, otherwise it will affect the marking accuracy, and in severe cases, there may be marking displacement, uneven laser power, and other phenomena.

5. Do not adjust the hardware configuration such as the board potentiometer without authorization, and do not disassemble the scanning galvanometer component without authorization.

Technical Parameters

Precision and Error
Step Response Time(1% of full scale)	288μs
Step Response Time(10% of full scale)	895μs
Tracking Error Time	≤164μs
Linearity	99.9%
Repeatability	＜8μRad
Gain Error	＜5mRad
Zero Offset	＜5mRad
Long-term Drift Over 8 Hours	＜0.5mRad
Scale Drift	＜40PPM/℃
Zero Drift	＜15μRad/℃
Laser Matching
Maximum CW Fiber Laser Power	2000W
Reflection Wavelength of Lens	1064~1080nm (High power coating)
Water cooling control
Water Temperature	25±3℃
Maximum Water Pressure	＜3bar
Flow	>1L/min
Water Pipe Specifications	Outer Diameter Φ6mm Inner Diameter Φ4mm
Power and Signal
Input Voltage	±15VDC
Rated Current	2A
Interface Signal	XY2-100
Mechanical Scan Angle	±11°
Working Current, Temperature, Dimension
Working Temperature	0℃~45℃
Storage Temperature	-10℃~60℃
Aperture	10mm
Beam Displacement	13.5mm
Galvanometer Scanner Dimension (LxWxH)	406.2×206.7×251.1mm
Galvanometer Scanner Weight	≈ 4.4kg

Keywords: HP10-2000 High Power Galvo Scanner

HP10-2000 High Power Galvo Scanner

HP10-2000 high power galvanometer scanners have the good running stability，strong anti-interference ability and it can be applied to continuous fiber lasers within 2000W. According to the divergence angle parameters of the laser, the corresponding QBH beam expanding collimator lens assembly and quartz field lens can be configured. The parallel beam spot after beam expansion should be ≤10mm, and the field lens needs to choose a quartz field lens with an incident spot of 10mm.

info@sino-galvo.com

400-055-8805

Classification

High-Power Galvo System

Product Inquiry Related Products