Language

Product Features

■ Adopted with high-performance scanning motor which imported from the America and the international advanced photoelectric sensing technology.

■ Differential photoelectric sensor for accurate detection of motor rotor position, good linearity, lower drift, high resolution and repeat positioning.

■ Drives with advanced detection ability of position and speed, greatly improved the dynamic response performance and scanning speed of the whole system.

■ Design of overload, over-current and reverse connect protection, makes the system running more reliable.

■ The whole system adopted the Optimization Designing of electromagnetic compatibility, with high signal-to-noise ratio and strong anti-interference ability.

■ Scanner size is smaller, with 7mm beam input aperture, which can meet the industrial demands of higher speed, higher precision and more compact systems.

■ With only 700g total weight, the scanner can be integrated into different application systems easily. The housing is very strong and dustproof. Thus it can be used in the extremely bad environment.

Technical Parameters

Speed
Marking Speed(1)		10000mm/s
Positioning Speed		15000mm/s
Writing Speed(2)		438cps
Step Response Time(1% of full scale)		260μs
Step Response Time(10% of full scale)		560μs
Tracking Error Time		≤162μs
Precision and Error
Linearity		99.9%
Repeatability (RMS)		＜8μRad
Gain Error		＜5mRad
Zero Offset		＜5mRad
Long-term Drift Over 8 Hours		＜0.5mRad
Scale Drift		＜40PPM/℃
Zero Drift		＜15μRad/℃
Wavelength(3)		10600nm/1064nm/355nm
Power and Signal
Input Voltage		±15VDC
Rated Current		2A
Interface Signal	Digital	XY2-100
	Analog	±5V
Max Machinery Scan Angle(4)		±11°
Working Current, Temperature, Dimension
Working Temperature		0℃--45℃
Storage Temperature		-10℃--60℃
Aperture		7mm
Galvanometer Scanner Dimension (LxWxH)		80x69x80mm
Galvanometer Scanner Weight		≈0.7Kg

Note: The above data are tested after 30 min warm-up

⁽¹⁾With F-theta objective, F=160mm, marking 2mm height single character

⁽²⁾With F-theta objective, F=160mm, marking 1mm height single character per second

⁽³⁾Special wavelength coating film can be customized

⁽⁴⁾If any special requirement, customization is available. Factory default value is ±11°.

Keywords: SG1105 Galvo Scanner

SG1105 Galvo Scanner

SG1105 galvanometer scanner is used for high speed and online flight marking. The standard incident spot diameter is 10mm. SG1105 galvanometer system has zero drift, high speed, small volume, low temperature and stable and reliable running etc. Our galvanometer scanner’s performance has already reached the international leading level in this field and won several national patents.

info@sino-galvo.com

400-055-8805

Classification

2-Axis Galvo Scanner

Product Inquiry Related Products