-
-
-
Application
Product Features
- Built-in 13 million pixel camera, positioning accuracy error is only 0.1mm.
- Auto focus mode, one button to quickly locate the preset focus height, improve work efficiency.
- Adopted high-performance scanning motor which imported from the America and the international advanced photoelectric sensing technology.
- Differential photoelectric sensor for accurate detection of motor rotor position, good linearity, lower drift, high resolution and repeat positioning.
- Drives with advanced detection ability of position and speed, greatly improving the dynamic response performance and scanning speed of the whole system.
- Design of overload, over-current and reverse connect protection, making the system running more reliable.
- The whole system adopting the Optimization Designing of electromagnetic compatibility, with high signal-to-noise ratio and strong anti-interference ability.
- Smaller scanner size, which meets the increasing industrial demands of higher precision and more compact systems. 7mm~10mm beam input aperture and also the mirror covering a variety of wavelength range.
- The housing is very strong and dustproof. Thus it can be used in the extremely bad environment.
Technical Parameters
|
Speed |
|
|
Marking Speed(1) |
4000mm/s |
|
Writing Speed(2) |
301cps |
|
Step Response Time(1% of full scale) |
370us |
|
Step Response Time(10% of full scale) |
630us |
|
Tracking Error Time |
≤202us |
|
Precision and Error |
|
|
Linearity |
99.9% |
|
Repeatability (RMS) |
＜8μRad |
|
Gain Error |
＜5mRad |
|
Zero Offset |
＜5mRad |
|
Long-term Drift Over 8 Hours |
＜0.5mRad |
|
Scale Drift |
＜40PPM/℃ |
|
Zero Drift |
＜15μRad./℃ |
|
Power and Signal |
|
|
Input Voltage |
±15VDC |
|
Rated Current |
2A |
|
Interface Signal |
XY2-100 |
|
Mechanical Scan Angle(3) |
±11° |
|
Working Current, Temperature, Dimension |
|
|
Working Temperature |
0℃--45℃ |
|
Storage Temperature |
-10℃--60℃ |
|
Aperture |
10mm |
|
Galvanometer Scanner Dimension (LxWxH) |
134×96.5×120.6mm |
|
Galvanometer Scanner Weight |
≈0.9Kg |
|
Auto-focusing Control Parameters |
|
|
Measure Solution |
Laser Ranging |
|
Measure range (2 options) |
120~280mm/200~600mm |
|
Measure Resolution |
0.01mm |
|
Measure Accuracy |
±0.1mm |
|
Laser Wavelength |
620~690nm |
|
Single Measurement Time |
0.2s |
Note: The above data are tested after 30 min warm-up
(1) With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) If any special requirement, customization is available. Factory default value is ±11°
Keywords: AF-MC1603 / AF-MC1603-A Galvo with Monitoring System
AF-MC1603 / AF-MC1603-A Galvo with Monitoring System
Contact us
Classification
Product Features
- Built-in 13 million pixel camera, positioning accuracy error is only 0.1mm.
- Auto focus mode, one button to quickly locate the preset focus height, improve work efficiency.
- Adopted high-performance scanning motor which imported from the America and the international advanced photoelectric sensing technology.
- Differential photoelectric sensor for accurate detection of motor rotor position, good linearity, lower drift, high resolution and repeat positioning.
- Drives with advanced detection ability of position and speed, greatly improving the dynamic response performance and scanning speed of the whole system.
- Design of overload, over-current and reverse connect protection, making the system running more reliable.
- The whole system adopting the Optimization Designing of electromagnetic compatibility, with high signal-to-noise ratio and strong anti-interference ability.
- Smaller scanner size, which meets the increasing industrial demands of higher precision and more compact systems. 7mm~10mm beam input aperture and also the mirror covering a variety of wavelength range.
- The housing is very strong and dustproof. Thus it can be used in the extremely bad environment.
Technical Parameters
|
Speed |
|
|
Marking Speed(1) |
4000mm/s |
|
Writing Speed(2) |
301cps |
|
Step Response Time(1% of full scale) |
370us |
|
Step Response Time(10% of full scale) |
630us |
|
Tracking Error Time |
≤202us |
|
Precision and Error |
|
|
Linearity |
99.9% |
|
Repeatability (RMS) |
＜8μRad |
|
Gain Error |
＜5mRad |
|
Zero Offset |
＜5mRad |
|
Long-term Drift Over 8 Hours |
＜0.5mRad |
|
Scale Drift |
＜40PPM/℃ |
|
Zero Drift |
＜15μRad./℃ |
|
Power and Signal |
|
|
Input Voltage |
±15VDC |
|
Rated Current |
2A |
|
Interface Signal |
XY2-100 |
|
Mechanical Scan Angle(3) |
±11° |
|
Working Current, Temperature, Dimension |
|
|
Working Temperature |
0℃--45℃ |
|
Storage Temperature |
-10℃--60℃ |
|
Aperture |
10mm |
|
Galvanometer Scanner Dimension (LxWxH) |
134×96.5×120.6mm |
|
Galvanometer Scanner Weight |
≈0.9Kg |
|
Auto-focusing Control Parameters |
|
|
Measure Solution |
Laser Ranging |
|
Measure range (2 options) |
120~280mm/200~600mm |
|
Measure Resolution |
0.01mm |
|
Measure Accuracy |
±0.1mm |
|
Laser Wavelength |
620~690nm |
|
Single Measurement Time |
0.2s |
Note: The above data are tested after 30 min warm-up
(1) With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) If any special requirement, customization is available. Factory default value is ±11°
Keywords: AF-MC1603 / AF-MC1603-A Galvo with Monitoring System
Sino-Galvo (Jiangsu) Technology Co., Ltd.
No. 33 Hengtong Road, Economic Development District, Zhenjiang, Jiangsu, China. 212000
Follow us
Copyright © 2025 Sino-Galvo (Jiangsu) Technology Co., Ltd.. Pv6, IPv4