-
-
-
Application
Product Features
■ The scanner is small in size, light in weight and ergonomically designed handheld laser system;
■ Equipped with high-performance micro-scanning motor and original imported optical sensor, it has fast scanning speed and high stability;
■ the software has fault self-detection function, reliable fault signal output, can fully ensure the security of the scanner;
■ The software has simple operation interface, parameter memory function, preset various treatment modes, and easy operation;
■ Square, circle, triangle, hexagon and other graphics are optional and can be adjusted to achieve accurate scanning;
■ The automatic contour extraction function of image shooting is adopted to adjust with the hand-drawing function, so as to carry out more accurate treatment operation on the lesion area;
■ The software can accurately set the point spacing, residence time and interval time, so as to effectively control the energy, and the laser power and the indicating light brightness can be calibrated;
■ Standardized interface of software board card, easy to connect with other control systems, and customized special control system for customers.
Technical Parameters
Motor Specification
| Working Temperature | 0-45℃ |
| Linearity | 99.9% |
| Setting Time | ≤0.35ms |
| Scale Drift | 40PPM/℃ |
| Zero Drift | <15μRad./℃ |
| Long-term Drift Over 8 Hours | <0.5mRad |
| RMS Current | 2.0A |
| Peak Current | 10A |
| Maximum Scan Angle | ±15° |
| Storage Temperature | -10 to +60℃ |
| Resolution | 12μrad |
| Repeatability | 8μrad |
| Input Aperture | 5.0-7.0mm |
| Beam Displacement | 10.7mm |
| Motor Weight | 13g |
| Frequency (scan angle < 1° Mechanical angle） | ≤1000Hz |
Servo Driver Board Specification
| Input Voltage(MAX.RMS) | ±15VDC |
| Interface Signals(Analog) | ±5V |
| Fault signal output(TTL level) | H for galvo working normally L for galvo working failure |
| Analog Signal Input Resistance | 200KΩ±1% |
| Position Signal Input Resistance | 1KΩ±1% |
| Position Signal Input Scale Factor | 0.33V/° |
| Position Signal Output Scale Factor | 0.33V/° |
| Working Temperature | 0-45℃ |
| Dimension(L×W×H) | 75×50×28mm |
Keywords: JS1305 Laser Beauty Galvo System
JS1305 Laser Beauty Galvo System
Contact us
Classification
Product Features
■ The scanner is small in size, light in weight and ergonomically designed handheld laser system;
■ Equipped with high-performance micro-scanning motor and original imported optical sensor, it has fast scanning speed and high stability;
■ the software has fault self-detection function, reliable fault signal output, can fully ensure the security of the scanner;
■ The software has simple operation interface, parameter memory function, preset various treatment modes, and easy operation;
■ Square, circle, triangle, hexagon and other graphics are optional and can be adjusted to achieve accurate scanning;
■ The automatic contour extraction function of image shooting is adopted to adjust with the hand-drawing function, so as to carry out more accurate treatment operation on the lesion area;
■ The software can accurately set the point spacing, residence time and interval time, so as to effectively control the energy, and the laser power and the indicating light brightness can be calibrated;
■ Standardized interface of software board card, easy to connect with other control systems, and customized special control system for customers.
Technical Parameters
Motor Specification
| Working Temperature | 0-45℃ |
| Linearity | 99.9% |
| Setting Time | ≤0.35ms |
| Scale Drift | 40PPM/℃ |
| Zero Drift | <15μRad./℃ |
| Long-term Drift Over 8 Hours | <0.5mRad |
| RMS Current | 2.0A |
| Peak Current | 10A |
| Maximum Scan Angle | ±15° |
| Storage Temperature | -10 to +60℃ |
| Resolution | 12μrad |
| Repeatability | 8μrad |
| Input Aperture | 5.0-7.0mm |
| Beam Displacement | 10.7mm |
| Motor Weight | 13g |
| Frequency (scan angle < 1° Mechanical angle） | ≤1000Hz |
Servo Driver Board Specification
| Input Voltage(MAX.RMS) | ±15VDC |
| Interface Signals(Analog) | ±5V |
| Fault signal output(TTL level) | H for galvo working normally L for galvo working failure |
| Analog Signal Input Resistance | 200KΩ±1% |
| Position Signal Input Resistance | 1KΩ±1% |
| Position Signal Input Scale Factor | 0.33V/° |
| Position Signal Output Scale Factor | 0.33V/° |
| Working Temperature | 0-45℃ |
| Dimension(L×W×H) | 75×50×28mm |
Keywords: JS1305 Laser Beauty Galvo System
Sino-Galvo (Jiangsu) Technology Co., Ltd.
33 Hengtong Road, Dingmao Economic Development District, Zhenjiang, Jiangsu, China
Follow us
Copyright © 2025 Sino-Galvo (Jiangsu) Technology Co., Ltd.. Pv6, IPv4