-
-
-
Application
Product Features
■ The differential optoelectronic sensor precisely detects the motor rotor's position, offering excellent linearity, minimal drift, and high resolution as well as outstanding repeat positioning accuracy.
■ Precisely designed load for the 16mm lens, featuring high motor assembly accuracy, a rational structural design, minimal static friction coefficient, and negligible zero-position offset—ensuring excellent dynamic system performance.
■ Employs a water-cooling structure to effectively manage the galvanometer's operating temperature.
■ The driver features advanced position and velocity feedback detection, significantly enhancing the system's dynamic response performance and scanning speed.
■ The design includes overload, overcurrent, and reverse-polarity protection, ensuring more reliable system operation.
■ The entire system features an electromagnetically compatible optimized design, delivering a high signal-to-noise ratio and strong anti-interference capability.
■ Addressed common issues such as galvanometer motor temperature drift, signal interference, and zero-point drift.
Performance Technical Specifications
| Speed | |
| Marking speed (1) | 2000 mm/s |
| Write speed (2) | 247 cps |
| Step response time (full stroke) 1% ) | 540μs |
| Step response time (full stroke) 10% ) | 1050 microseconds |
| Tracking error | ≤320µs |
| Accuracy and Error | |
| Linearity | 99.9% |
| Repeat positioning accuracy | <8 μRad |
| Gain Error | <5 mRad |
| Zero-point offset (batch origin error) | <5 mRad |
| Long-term drifting (continuous operation) 8 Hours) | <0.5 mRad |
| Proportional Drift | <40 PPM/ °C |
| Zero-point drift | <15 μRad / °C |
| Lens damage threshold | |
| K9 Matrix | 9.1 J/cm² |
| Yes Matrix | 10 J/cm² |
| Lens reflection wavelength (3) | 10600nm / 1064nm / 355nm |
| Water-cooled Control | |
| Water temperature | 25±3°C |
| Maximum water pressure | <3 bar |
| Traffic | >1 L/min |
| Pipe specifications | Outer diameter φ6 mm, inner diameter φ4 mm |
| Power and Signal | |
| Input voltage | ±24VDC |
| Rated current | 4A |
| Interface Protocol | XY2-100 |
| Scan angle | ±11° |
| Operating current, temperature, dimensions | |
| Operating temperature | 0°C ~ 45°C |
| Storage temperature | -10 °C ~60 °C |
| Laser input aperture | 16mm |
| Galvanometer mirror dimensions (length × width × height) | 170x141x130mm |
| Galvanometer weight | ≈ 4.13 kg |
Note: The above parameters were measured after the engine had been running for 30 minutes.
(1) Using an F-Theta lens with a focal length of 160mm, mark 2mm-high single-line characters; (2) Using an F-Theta lens with a focal length of 160mm, it marks single-line characters 1mm high at a rate of 1mm per second; (3) Customizable special-wavelength coatings.
Keywords: SG8216-A Laser Galvanometer
SG8216-A Laser Galvanometer
Contact us
Classification
Product Features
■ The differential optoelectronic sensor precisely detects the motor rotor's position, offering excellent linearity, minimal drift, and high resolution as well as outstanding repeat positioning accuracy.
■ Precisely designed load for the 16mm lens, featuring high motor assembly accuracy, a rational structural design, minimal static friction coefficient, and negligible zero-position offset—ensuring excellent dynamic system performance.
■ Employs a water-cooling structure to effectively manage the galvanometer's operating temperature.
■ The driver features advanced position and velocity feedback detection, significantly enhancing the system's dynamic response performance and scanning speed.
■ The design includes overload, overcurrent, and reverse-polarity protection, ensuring more reliable system operation.
■ The entire system features an electromagnetically compatible optimized design, delivering a high signal-to-noise ratio and strong anti-interference capability.
■ Addressed common issues such as galvanometer motor temperature drift, signal interference, and zero-point drift.
Performance Technical Specifications
| Speed | |
| Marking speed (1) | 2000 mm/s |
| Write speed (2) | 247 cps |
| Step response time (full stroke) 1% ) | 540μs |
| Step response time (full stroke) 10% ) | 1050 microseconds |
| Tracking error | ≤320µs |
| Accuracy and Error | |
| Linearity | 99.9% |
| Repeat positioning accuracy | <8 μRad |
| Gain Error | <5 mRad |
| Zero-point offset (batch origin error) | <5 mRad |
| Long-term drifting (continuous operation) 8 Hours) | <0.5 mRad |
| Proportional Drift | <40 PPM/ °C |
| Zero-point drift | <15 μRad / °C |
| Lens damage threshold | |
| K9 Matrix | 9.1 J/cm² |
| Yes Matrix | 10 J/cm² |
| Lens reflection wavelength (3) | 10600nm / 1064nm / 355nm |
| Water-cooled Control | |
| Water temperature | 25±3°C |
| Maximum water pressure | <3 bar |
| Traffic | >1 L/min |
| Pipe specifications | Outer diameter φ6 mm, inner diameter φ4 mm |
| Power and Signal | |
| Input voltage | ±24VDC |
| Rated current | 4A |
| Interface Protocol | XY2-100 |
| Scan angle | ±11° |
| Operating current, temperature, dimensions | |
| Operating temperature | 0°C ~ 45°C |
| Storage temperature | -10 °C ~60 °C |
| Laser input aperture | 16mm |
| Galvanometer mirror dimensions (length × width × height) | 170x141x130mm |
| Galvanometer weight | ≈ 4.13 kg |
Note: The above parameters were measured after the engine had been running for 30 minutes.
(1) Using an F-Theta lens with a focal length of 160mm, mark 2mm-high single-line characters; (2) Using an F-Theta lens with a focal length of 160mm, it marks single-line characters 1mm high at a rate of 1mm per second; (3) Customizable special-wavelength coatings.
Keywords: SG8216-A Laser Galvanometer
Sino-Galvo (Jiangsu) Technology Co., Ltd.
33 Hengtong Road, Dingmao Economic Development District, Zhenjiang, Jiangsu, China
Follow us
Copyright © 2025 Sino-Galvo (Jiangsu) Technology Co., Ltd.. Pv6, IPv4